1-855-55-DEALS
1-855-553-3257
Show All Manufacturers
Manufacturers
Newsletter

SDC

Sort by
Display per page

SDC BACKOFF BRAKE HOLD MODULE 2-1/4X1-5/8-5/8, #1020

The Brake Hold Module connects to your bike's electronic speed pick-up sensor (will not work with cable driven speedometers), to keep your brake lights on when you release your brakes but are still decelerating.- Mode #1: Emits a visual signal of 3 short light flashes, followed by 1 long light flash (3.5 seconds). The signal automatically repeats itself as long as the brake lights are on. Mode #2: Emits a visual signal of 5 quick flashes, followed by a steady on light that remains steady as long as the brake lights are on.- 12 volts DC - Maximum Capacity: 10 Amps (normally up to 3 bulbs)!.- Compact size. - 2-1/4"L x 1-5/8"W x 5/8"H sealed weather resistant heat sink case. - 1 Year limited warranty.- Your Bike MUST have Electronic Pick-Up Sensor for this module to function.
$64.95 $61.58

SDC BACKOFF BRAKE LIGHT SIGNAL MODULE 2-1/4X1-5/8X5/8, #1001

Compact solid state module converts your ordinary brake light into an attention getting visual alerting device, more visibility and conspicuity when you are stopped or stopping. With BackOFF installed, when you apply your brakes, it causes your brake light to automatically emit a visual alerting signal of 3 short light flashes, followed by 1 steady on light condition of 3.5 seconds. Signal automatically repeats itself as long as the brakes are applied. Compact size. - 2-1/4"L x 1-5/8"W x 5/8"H. 12v DC, 10A max.
$37.95 $40.41

SDC BACKOFF WIG WAG BRAKE LIGHT SIGNAL MODULE 2-1/4X1-5/8X5/8, #1009

The Wig-Wag enables your brake lights to alternate back and forth in a wig-wagging pattern. - This module is specifically designed for use with motorcycle's that are equipped with 2 brake lights located side by side. - Choice of 2 different modes during installation. - 12 volts DC, Maximum Capacity 10 Amps!.- Compact size. - 2-1/4"L x 1-5/8"W x 5/8"H sealed weather resistant heat sink case.- Limited Warranty - One Year.
$42.95 $44.45

SDC BACKOFF XP BRAKE LIGHT SIGNAL MODULE 2-1/4X1-5/8X5/8, #1004

This module converts your ordinary brake lights into your choice of two attention getting visual alerting signals when you apply your brakes:.- Mode #1: Emits a visual signal of 4 short light flashes, followed by 1 long light flash (3.5 seconds). The signal automatically repeats itself as long as the brakes are applied. Mode #2: Emits a visual signal of 5 short flashes, followed by a steady on light that remains steady on as long as the brakes are applied.- Compact - 2-1/4"L x 1-5/8"W x 5/8"H sealed weather resistant heat sink case.- 12 volts DC, 10A max capacity.- Limited Warranty - One Year.NOTE: This module is rated at 10 Amps which will only drive 3 - 1156/1157 bulbs. Please DO NOT install any BackOFF Brake Light product on your turn signals, it is illegal and also confusing to following vehicles.
$42.95 $44.44

SDC DUAL-LOAD EQUALIZER 2-1/4X1-5/8-5/8, #1008

The Dual Load Equalizer is designed to correct the issue of turn signals flashing too quickly or not at all. It does this by adding back the load to your mechanical flasher relay that was removed by converting stock incandescent turn signals to LED's. - Dependable weather proof Solid-state electronic components. 2 1/4" L x 1 5/8" W x 5/8" H.
$19.95 $25.90

SDC HEADS-UP VOLTAGE MONITOR 2-1/4X1-5/8-5/8, #1050

This module is a micro-processor that monitors the output of the charging system and is accurate to within 200 milli-volts. The Heads-Up Voltage Monitor's onboard microprocessor performs a self-test each time voltage is applied. Additionally, you will be notified of serious fault conditions by an attention-getting flash of the LED. - The single, multi-color LED (red-amber-green) visually indicates the state of your motorcycle's battery / charging system. At a glance, you will instantly know whether the voltage is normal or abnormal, Auto-dimming - after 8 seconds at a single voltage, the LED intensity is lowered to 50%.- Voltage Range: 6 to 17 VDC, Accuracy: within 200 millivolts, Amp Draw: 20-85 milli-amps. - Dimension: 2 1/4" L x 1 5/8" W x 5/8" H.
$29.95 $33.96

SDC LED LICENSE PLATE FRAME BLACK W/RED LENS, #2003

These dual intensity LED License Plate Frames have been designed to give greater visibility and conspicuity to your motorcycle.- Engineered to function in both high and low intensity brightness for a multitude of applications.- Because many motorcycles have only one brake/running light bulb, these units can easily be used as back-up brake, and running lights, providing you a greater degree of safety and added visibility.- Some models feature 3 amber LEDs on both sides of the light bars that function as auxiliary turning signals.- Mount and install this beautifully crafted license plate frame and give your bike an excellent finished appearance compared to an otherwise obtrusive license plate.
$64.95 $61.58

SDC LED LICENSE PLATE FRAME BLACK W/TURN SIGNALS, #2603

These dual intensity LED License Plate Frames have been designed to give greater visibility and conspicuity to your motorcycle.- Engineered to function in both high and low intensity brightness for a multitude of applications.- Because many motorcycles have only one brake/running light bulb, these units can easily be used as back-up brake, and running lights, providing you a greater degree of safety and added visibility.- Some models feature 3 amber LEDs on both sides of the light bars that function as auxiliary turning signals.- Mount and install this beautifully crafted license plate frame and give your bike an excellent finished appearance compared to an otherwise obtrusive license plate.
$74.95 $70.22

SDC LED LICENSE PLATE FRAME CHROME W/RED LENS, #2001

These dual intensity LED License Plate Frames have been designed to give greater visibility and conspicuity to your motorcycle.- Engineered to function in both high and low intensity brightness for a multitude of applications.- Because many motorcycles have only one brake/running light bulb, these units can easily be used as back-up brake, and running lights, providing you a greater degree of safety and added visibility.- Some models feature 3 amber LEDs on both sides of the light bars that function as auxiliary turning signals.- Mount and install this beautifully crafted license plate frame and give your bike an excellent finished appearance compared to an otherwise obtrusive license plate.
$64.95 $61.58

SDC LED LICENSE PLATE FRAME CHROME W/TURN SIGNALS, #2601

These dual intensity LED License Plate Frames have been designed to give greater visibility and conspicuity to your motorcycle.- Engineered to function in both high and low intensity brightness for a multitude of applications.- Because many motorcycles have only one brake/running light bulb, these units can easily be used as back-up brake, and running lights, providing you a greater degree of safety and added visibility.- Some models feature 3 amber LEDs on both sides of the light bars that function as auxiliary turning signals.- Mount and install this beautifully crafted license plate frame and give your bike an excellent finished appearance compared to an otherwise obtrusive license plate.
$74.95 $70.22

SDC LED LICENSE PLATE FRAME TWISTED CHROME W/RED LENS, #2002

These dual intensity LED License Plate Frames have been designed to give greater visibility and conspicuity to your motorcycle.- Engineered to function in both high and low intensity brightness for a multitude of applications.- Because many motorcycles have only one brake/running light bulb, these units can easily be used as back-up brake, and running lights, providing you a greater degree of safety and added visibility.- Some models feature 3 amber LEDs on both sides of the light bars that function as auxiliary turning signals.- Mount and install this beautifully crafted license plate frame and give your bike an excellent finished appearance compared to an otherwise obtrusive license plate.
$64.95 $61.58

SDC LED LICENSE PLATE FRAME TWISTED CHROME W/TURN SIGNALS, #2602

These dual intensity LED License Plate Frames have been designed to give greater visibility and conspicuity to your motorcycle.- Engineered to function in both high and low intensity brightness for a multitude of applications.- Because many motorcycles have only one brake/running light bulb, these units can easily be used as back-up brake, and running lights, providing you a greater degree of safety and added visibility.- Some models feature 3 amber LEDs on both sides of the light bars that function as auxiliary turning signals.- Mount and install this beautifully crafted license plate frame and give your bike an excellent finished appearance compared to an otherwise obtrusive license plate.
$74.95 $70.22

SDC PENTA-STAR TURN SIGNAL BRAKE LIGHT SYSTEM 2-1/4X1-5/8X5/8, #1007

The Penta-Star module combines all of the functions of the Self-Canceling Turn Signal Module and the Tri-Star Module.- Three turn signal timing Modes - Self Canceling non-load dependent flash duration: all three modes are flash time constant whether using incandescent or LED lighting.- Five unique turn signal modes of operation.- Hazard Mode - Non self-canceling.- Adds brake light function to turn signals.- Designed for use with individual momentary type turn signal switches mounted on the left and right handle bars.- Weather proof dependable solid-state electronic components Dimension: 2 1/4" L x 1 5/8" W x 5/8" H Mounting: Secure to flat surface with double sided VHB tape (included).
$99.95 $89.45

SDC PENTA-STAR XP TURN SIGNAL BRAKE LIGHT SYSTEM, #1017

This module combines all of the functions of the Self-Canceling Turn Signal Module and the Tri-Star Module . . and now has running lights capabilities!!!.- Three turn signal timing modes - self-canceling.- Five Unique Turn Signal Modes of Operation.- Hazard mode - Non self-canceling.- Adds brake light function to turn signals.- Non-load dependent flash duration: all three modes are flash time constant whether using incandescent or LED lighting.- Voltage: 12 VDC, Negative Ground. Max Load Capacity: 6 amps per left or right channel. - Dimension: 2 1/4" L x 1 5/8" W x 5/8" H.- Mounting: Secure to flat surface with double sided VHB tape (included). - Weather Proof Dependable Solid-state electronic components.
$109.95 $98.41

SDC PLUG PLAY HEADLIGHT MODULE 2-1/4X1-5/8-5/8, #1015

Modulator pulses headlight for extra daytime visibility . Features Heads Up Alert, pressing horn button makes headlight flash 3 times. Surge protected, auto night shut-Off . Compact size - 2 1/4" long X 1 5/8" wide X 5/8" high. Weather Resistant Heat Sink Case, 1-Year Warranty.
$74.95 $70.22

SDC PLUG PLAY HEADLIGHT MODULE H4 DUAL ADAPTER, #1080

Modulator pulses headlight for extra daytime visibility . Features Heads Up Alert, pressing horn button makes headlight flash 3 times. Surge protected, auto night shut-Off . Compact size - 2 1/4" long X 1 5/8" wide X 5/8" high. Weather Resistant Heat Sink Case, 1-Year Warranty.
$14.95 $21.86