1-855-55-DEALS
1-855-553-3257
Show All Manufacturers
Manufacturers
Newsletter

Saddlebags

Sort by
Display per page

ACCUTRONIX AERO BAG LIGHTS BLACK W/AMBER LENS, #BL02-AB

These LED turn signals fit nicely between the saddlebag & fender on a custom FLH or on any flat surface. They are a great solution for adding rear lights to custom baggers. The LED unit is a 3-wire light & can be used as a running, turn and/or brake light. A load equalizer or turn signal controller may be needed for your application. The billet housing is 8-3/8" Long & 1-1/2" Wide. The LED unit has 10 LED's & is 5-1/4" Long & -1/2" Wide. Approximately -3/4" of clearance is needed behind the surface. Machined from 6061 T6 billet aluminum. They are available in a chromeplated finish or our "Night Series", brilliantly Black Anodized, then areas are machined again for a contrast of a black anodized & a raw aluminum finish. Sold in pairs.
$179.95 $161.05

ACCUTRONIX AERO BAG LIGHTS BLACK W/RED LENS, #BL01-AB

These LED turn signals fit nicely between the saddlebag & fender on a custom FLH or on any flat surface. They are a great solution for adding rear lights to custom baggers. The LED unit is a 3-wire light & can be used as a running, turn and/or brake light. A load equalizer or turn signal controller may be needed for your application. The billet housing is 8-3/8" Long & 1-1/2" Wide. The LED unit has 10 LED's & is 5-1/4" Long & -1/2" Wide. Approximately -3/4" of clearance is needed behind the surface. Machined from 6061 T6 billet aluminum. They are available in a chromeplated finish or our "Night Series", brilliantly Black Anodized, then areas are machined again for a contrast of a black anodized & a raw aluminum finish. Sold in pairs.
$179.95 $161.05

ACCUTRONIX AERO BAG LIGHTS CHROME W/AMBER LENS, #BL02-AC

These LED turn signals fit nicely between the saddlebag & fender on a custom FLH or on any flat surface. They are a great solution for adding rear lights to custom baggers. The LED unit is a 3-wire light & can be used as a running, turn and/or brake light. A load equalizer or turn signal controller may be needed for your application. The billet housing is 8-3/8" Long & 1-1/2" Wide. The LED unit has 10 LED's & is 5-1/4" Long & -1/2" Wide. Approximately -3/4" of clearance is needed behind the surface. Machined from 6061 T6 billet aluminum. They are available in a chromeplated finish or our "Night Series", brilliantly Black Anodized, then areas are machined again for a contrast of a black anodized & a raw aluminum finish. Sold in pairs.
$179.95 $161.05

ACCUTRONIX AERO BAG LIGHTS CHROME W/RED LENS, #BL01-AC

These LED turn signals fit nicely between the saddlebag & fender on a custom FLH or on any flat surface. They are a great solution for adding rear lights to custom baggers. The LED unit is a 3-wire light & can be used as a running, turn and/or brake light. A load equalizer or turn signal controller may be needed for your application. The billet housing is 8-3/8" Long & 1-1/2" Wide. The LED unit has 10 LED's & is 5-1/4" Long & -1/2" Wide. Approximately -3/4" of clearance is needed behind the surface. Machined from 6061 T6 billet aluminum. They are available in a chromeplated finish or our "Night Series", brilliantly Black Anodized, then areas are machined again for a contrast of a black anodized & a raw aluminum finish. Sold in pairs.
$179.95 $161.05

ACCUTRONIX DIAMOND BAG LIGHTS BLACK W/AMBER LENS, #BL02-IB

These LED turn signals fit nicely between the saddlebag & fender on a custom FLH or on any flat surface. They are a great solution for adding rear lights to custom baggers. The LED unit is a 3-wire light & can be used as a running, turn and/or brake light. A load equalizer or turn signal controller may be needed for your application. The billet housing is 8-3/8" Long & 1-1/2" Wide. The LED unit has 10 LED's & is 5-1/4" Long & -1/2" Wide. Approximately -3/4" of clearance is needed behind the surface. Machined from 6061 T6 billet aluminum. They are available in a chromeplated finish or our "Night Series", brilliantly Black Anodized, then areas are machined again for a contrast of a black anodized & a raw aluminum finish. Sold in pairs.
$179.95 $161.05

ACCUTRONIX DIAMOND BAG LIGHTS BLACK W/RED LENS, #BL01-IB

These LED turn signals fit nicely between the saddlebag & fender on a custom FLH or on any flat surface. They are a great solution for adding rear lights to custom baggers. The LED unit is a 3-wire light & can be used as a running, turn and/or brake light. A load equalizer or turn signal controller may be needed for your application. The billet housing is 8-3/8" Long & 1-1/2" Wide. The LED unit has 10 LED's & is 5-1/4" Long & -1/2" Wide. Approximately -3/4" of clearance is needed behind the surface. Machined from 6061 T6 billet aluminum. They are available in a chromeplated finish or our "Night Series", brilliantly Black Anodized, then areas are machined again for a contrast of a black anodized & a raw aluminum finish. Sold in pairs.
$179.95 $161.05

ACCUTRONIX DIAMOND BAG LIGHTS CHROME W/AMBER LENS, #BL02-IC

These LED turn signals fit nicely between the saddlebag & fender on a custom FLH or on any flat surface. They are a great solution for adding rear lights to custom baggers. The LED unit is a 3-wire light & can be used as a running, turn and/or brake light. A load equalizer or turn signal controller may be needed for your application. The billet housing is 8-3/8" Long & 1-1/2" Wide. The LED unit has 10 LED's & is 5-1/4" Long & -1/2" Wide. Approximately -3/4" of clearance is needed behind the surface. Machined from 6061 T6 billet aluminum. They are available in a chromeplated finish or our "Night Series", brilliantly Black Anodized, then areas are machined again for a contrast of a black anodized & a raw aluminum finish. Sold in pairs.
$179.95 $161.05

ACCUTRONIX DIAMOND BAG LIGHTS CHROME W/RED LENS, #BL01-IC

These LED turn signals fit nicely between the saddlebag & fender on a custom FLH or on any flat surface. They are a great solution for adding rear lights to custom baggers. The LED unit is a 3-wire light & can be used as a running, turn and/or brake light. A load equalizer or turn signal controller may be needed for your application. The billet housing is 8-3/8" Long & 1-1/2" Wide. The LED unit has 10 LED's & is 5-1/4" Long & -1/2" Wide. Approximately -3/4" of clearance is needed behind the surface. Machined from 6061 T6 billet aluminum. They are available in a chromeplated finish or our "Night Series", brilliantly Black Anodized, then areas are machined again for a contrast of a black anodized & a raw aluminum finish. Sold in pairs.
$179.95 $161.05

ACCUTRONIX SPEED BALL SADDLEBAG LATCH INSERTS (BLACK), #BLI14-SBN

Saddlebag latch cover Inserts for 2014-Up FLH's. These inserts replace the factory reflector and really clean up the stock latch cover. They are machined from 6061 T6 billet aluminum.They are available in a chrome plated finish and "Night Series", brilliantly black anodized, thenareas are machined again for a contrast of black anodized & a raw aluminum finish. Sold in pairs.
$72.95 $64.50

ACCUTRONIX SPEED BALL SADDLEBAG LATCH INSERTS (CHROME), #BLI14-SBC

Saddlebag latch cover Inserts for 2014-Up FLH's. These inserts replace the factory reflector and really clean up the stock latch cover. They are machined from 6061 T6 billet aluminum.They are available in a chrome plated finish and "Night Series", brilliantly black anodized, thenareas are machined again for a contrast of black anodized & a raw aluminum finish. Sold in pairs.
$72.95 $64.50

ACCUTRONIX TRIBAL BAG LIGHTS BLACK W/AMBER LENS, #BL02-LSN

These LED turn signals fit nicely between the saddlebag & fender on a custom FLH or on any flat surface. They are a great solution for adding rear lights to custom baggers. The LED unit is a 3-wire light & can be used as a running, turn and/or brake light. A load equalizer or turn signal controller may be needed for your application. The billet housing is 8-3/8" Long & 1-1/2" Wide. The LED unit has 10 LED's & is 5-1/4" Long & -1/2" Wide. Approximately -3/4" of clearance is needed behind the surface. Machined from 6061 T6 billet aluminum. They are available in a chromeplated finish or our "Night Series", brilliantly Black Anodized, then areas are machined again for a contrast of a black anodized & a raw aluminum finish. Sold in pairs.
$154.95 $134.20

ACCUTRONIX TRIBAL BAG LIGHTS BLACK W/RED LENS, #BL01-LSN

These LED turn signals fit nicely between the saddlebag & fender on a custom FLH or on any flat surface. They are a great solution for adding rear lights to custom baggers. The LED unit is a 3-wire light & can be used as a running, turn and/or brake light. A load equalizer or turn signal controller may be needed for your application. The billet housing is 8-3/8" Long & 1-1/2" Wide. The LED unit has 10 LED's & is 5-1/4" Long & -1/2" Wide. Approximately -3/4" of clearance is needed behind the surface. Machined from 6061 T6 billet aluminum. They are available in a chromeplated finish or our "Night Series", brilliantly Black Anodized, then areas are machined again for a contrast of a black anodized & a raw aluminum finish. Sold in pairs.
$154.95 $134.20

ACCUTRONIX TRIBAL BAG LIGHTS CHROME W/AMBER LENS, #BL02-LSC

These LED turn signals fit nicely between the saddlebag & fender on a custom FLH or on any flat surface. They are a great solution for adding rear lights to custom baggers. The LED unit is a 3-wire light & can be used as a running, turn and/or brake light. A load equalizer or turn signal controller may be needed for your application. The billet housing is 8-3/8" Long & 1-1/2" Wide. The LED unit has 10 LED's & is 5-1/4" Long & -1/2" Wide. Approximately -3/4" of clearance is needed behind the surface. Machined from 6061 T6 billet aluminum. They are available in a chromeplated finish or our "Night Series", brilliantly Black Anodized, then areas are machined again for a contrast of a black anodized & a raw aluminum finish. Sold in pairs.
$154.95 $134.20

ACCUTRONIX TRIBAL BAG LIGHTS CHROME W/RED LENS, #BL01-LSC

These LED turn signals fit nicely between the saddlebag & fender on a custom FLH or on any flat surface. They are a great solution for adding rear lights to custom baggers. The LED unit is a 3-wire light & can be used as a running, turn and/or brake light. A load equalizer or turn signal controller may be needed for your application. The billet housing is 8-3/8" Long & 1-1/2" Wide. The LED unit has 10 LED's & is 5-1/4" Long & -1/2" Wide. Approximately -3/4" of clearance is needed behind the surface. Machined from 6061 T6 billet aluminum. They are available in a chromeplated finish or our "Night Series", brilliantly Black Anodized, then areas are machined again for a contrast of a black anodized & a raw aluminum finish. Sold in pairs.
$154.95 $132.24

ACCUTRONIX VELOCITY SADDLEBAG LATCH INSERTS (BLACK), #BLI14-VN

Saddlebag latch cover Inserts for 2014-Up FLH's. These inserts replace the factory reflector and really clean up the stock latch cover. They are machined from 6061 T6 billet aluminum.They are available in a chrome plated finish and "Night Series", brilliantly black anodized, thenareas are machined again for a contrast of black anodized & a raw aluminum finish. Sold in pairs.
$77.95 $68.30

ACCUTRONIX VELOCITY SADDLEBAG LATCH INSERTS (CHROME), #BLI14-VC

Saddlebag latch cover Inserts for 2014-Up FLH's. These inserts replace the factory reflector and really clean up the stock latch cover. They are machined from 6061 T6 billet aluminum.They are available in a chrome plated finish and "Night Series", brilliantly black anodized, thenareas are machined again for a contrast of black anodized & a raw aluminum finish. Sold in pairs.
$77.95 $68.30