1-855-55-DEALS
1-855-553-3257
Show All Manufacturers
Manufacturers
Newsletter

Accutronix

Sort by
Display per page

ACCUTRONIX AERO BAG LIGHTS BLACK W/AMBER LENS, #BL02-AB

These LED turn signals fit nicely between the saddlebag & fender on a custom FLH or on any flat surface. They are a great solution for adding rear lights to custom baggers. The LED unit is a 3-wire light & can be used as a running, turn and/or brake light. A load equalizer or turn signal controller may be needed for your application. The billet housing is 8-3/8" Long & 1-1/2" Wide. The LED unit has 10 LED's & is 5-1/4" Long & -1/2" Wide. Approximately -3/4" of clearance is needed behind the surface. Machined from 6061 T6 billet aluminum. They are available in a chromeplated finish or our "Night Series", brilliantly Black Anodized, then areas are machined again for a contrast of a black anodized & a raw aluminum finish. Sold in pairs.
$179.95 $161.05

ACCUTRONIX AERO BAG LIGHTS BLACK W/RED LENS, #BL01-AB

These LED turn signals fit nicely between the saddlebag & fender on a custom FLH or on any flat surface. They are a great solution for adding rear lights to custom baggers. The LED unit is a 3-wire light & can be used as a running, turn and/or brake light. A load equalizer or turn signal controller may be needed for your application. The billet housing is 8-3/8" Long & 1-1/2" Wide. The LED unit has 10 LED's & is 5-1/4" Long & -1/2" Wide. Approximately -3/4" of clearance is needed behind the surface. Machined from 6061 T6 billet aluminum. They are available in a chromeplated finish or our "Night Series", brilliantly Black Anodized, then areas are machined again for a contrast of a black anodized & a raw aluminum finish. Sold in pairs.
$179.95 $161.05

ACCUTRONIX AERO BAG LIGHTS CHROME W/AMBER LENS, #BL02-AC

These LED turn signals fit nicely between the saddlebag & fender on a custom FLH or on any flat surface. They are a great solution for adding rear lights to custom baggers. The LED unit is a 3-wire light & can be used as a running, turn and/or brake light. A load equalizer or turn signal controller may be needed for your application. The billet housing is 8-3/8" Long & 1-1/2" Wide. The LED unit has 10 LED's & is 5-1/4" Long & -1/2" Wide. Approximately -3/4" of clearance is needed behind the surface. Machined from 6061 T6 billet aluminum. They are available in a chromeplated finish or our "Night Series", brilliantly Black Anodized, then areas are machined again for a contrast of a black anodized & a raw aluminum finish. Sold in pairs.
$179.95 $161.05

ACCUTRONIX AERO BAG LIGHTS CHROME W/RED LENS, #BL01-AC

These LED turn signals fit nicely between the saddlebag & fender on a custom FLH or on any flat surface. They are a great solution for adding rear lights to custom baggers. The LED unit is a 3-wire light & can be used as a running, turn and/or brake light. A load equalizer or turn signal controller may be needed for your application. The billet housing is 8-3/8" Long & 1-1/2" Wide. The LED unit has 10 LED's & is 5-1/4" Long & -1/2" Wide. Approximately -3/4" of clearance is needed behind the surface. Machined from 6061 T6 billet aluminum. They are available in a chromeplated finish or our "Night Series", brilliantly Black Anodized, then areas are machined again for a contrast of a black anodized & a raw aluminum finish. Sold in pairs.
$179.95 $161.05

ACCUTRONIX BRASS FORK STEM NUT, #7619-1E5

Brass triple tree stem nut manufactured in Phoenix Arizona USA from solid 360 brass. Fits all Accutronix 0degree raked triple trees, many other aftermarket triple trees, as well as stock trees for 71-85 FX, 82-87 FXR, 78-87 XL and also replaces the OEM # 45718-71 that are threaded 7/8"-24.
$52.95 $46.73

ACCUTRONIX DIAMOND BAG LIGHTS BLACK W/AMBER LENS, #BL02-IB

These LED turn signals fit nicely between the saddlebag & fender on a custom FLH or on any flat surface. They are a great solution for adding rear lights to custom baggers. The LED unit is a 3-wire light & can be used as a running, turn and/or brake light. A load equalizer or turn signal controller may be needed for your application. The billet housing is 8-3/8" Long & 1-1/2" Wide. The LED unit has 10 LED's & is 5-1/4" Long & -1/2" Wide. Approximately -3/4" of clearance is needed behind the surface. Machined from 6061 T6 billet aluminum. They are available in a chromeplated finish or our "Night Series", brilliantly Black Anodized, then areas are machined again for a contrast of a black anodized & a raw aluminum finish. Sold in pairs.
$179.95 $161.05

ACCUTRONIX DIAMOND BAG LIGHTS BLACK W/RED LENS, #BL01-IB

These LED turn signals fit nicely between the saddlebag & fender on a custom FLH or on any flat surface. They are a great solution for adding rear lights to custom baggers. The LED unit is a 3-wire light & can be used as a running, turn and/or brake light. A load equalizer or turn signal controller may be needed for your application. The billet housing is 8-3/8" Long & 1-1/2" Wide. The LED unit has 10 LED's & is 5-1/4" Long & -1/2" Wide. Approximately -3/4" of clearance is needed behind the surface. Machined from 6061 T6 billet aluminum. They are available in a chromeplated finish or our "Night Series", brilliantly Black Anodized, then areas are machined again for a contrast of a black anodized & a raw aluminum finish. Sold in pairs.
$179.95 $161.05

ACCUTRONIX DIAMOND BAG LIGHTS CHROME W/AMBER LENS, #BL02-IC

These LED turn signals fit nicely between the saddlebag & fender on a custom FLH or on any flat surface. They are a great solution for adding rear lights to custom baggers. The LED unit is a 3-wire light & can be used as a running, turn and/or brake light. A load equalizer or turn signal controller may be needed for your application. The billet housing is 8-3/8" Long & 1-1/2" Wide. The LED unit has 10 LED's & is 5-1/4" Long & -1/2" Wide. Approximately -3/4" of clearance is needed behind the surface. Machined from 6061 T6 billet aluminum. They are available in a chromeplated finish or our "Night Series", brilliantly Black Anodized, then areas are machined again for a contrast of a black anodized & a raw aluminum finish. Sold in pairs.
$179.95 $161.05

ACCUTRONIX DIAMOND BAG LIGHTS CHROME W/RED LENS, #BL01-IC

These LED turn signals fit nicely between the saddlebag & fender on a custom FLH or on any flat surface. They are a great solution for adding rear lights to custom baggers. The LED unit is a 3-wire light & can be used as a running, turn and/or brake light. A load equalizer or turn signal controller may be needed for your application. The billet housing is 8-3/8" Long & 1-1/2" Wide. The LED unit has 10 LED's & is 5-1/4" Long & -1/2" Wide. Approximately -3/4" of clearance is needed behind the surface. Machined from 6061 T6 billet aluminum. They are available in a chromeplated finish or our "Night Series", brilliantly Black Anodized, then areas are machined again for a contrast of a black anodized & a raw aluminum finish. Sold in pairs.
$179.95 $161.05

ACCUTRONIX FENDER SPACERS BLACK 41MMX0.8125, #TFS41-EMF812B

These FLH billet fender spacers are designed to work with Arlen Ness "Hot Legs" billet lower legs, AmericanSuspension " Bagger Legs" billet lower legs, or stock Harley Davidson 41MM FLH & FLT lower legs, not FX or XL legs.The 1-1/4" thick fender spacers can be used with a 6-3/8" wide custom front fender. The 1.0" thick fender spacers canbe used with a 6" wide custom front fender. The 0.8125" thick fender spacers can be used with a 5-1/2" wide customfront fender.
$110.95 $93.03

ACCUTRONIX FENDER SPACERS BLACK 41MMX1, #TFS41-EMF100B

These FLH billet fender spacers are designed to work with Arlen Ness "Hot Legs" billet lower legs, AmericanSuspension " Bagger Legs" billet lower legs, or stock Harley Davidson 41MM FLH & FLT lower legs, not FX or XL legs.The 1-1/4" thick fender spacers can be used with a 6-3/8" wide custom front fender. The 1.0" thick fender spacers canbe used with a 6" wide custom front fender. The 0.8125" thick fender spacers can be used with a 5-1/2" wide customfront fender.
$110.95 $93.28

ACCUTRONIX FENDER SPACERS BLACK 41MMX1.25, #TFS41-EMF125B

These FLH billet fender spacers are designed to work with Arlen Ness "Hot Legs" billet lower legs, AmericanSuspension " Bagger Legs" billet lower legs, or stock Harley Davidson 41MM FLH & FLT lower legs, not FX or XL legs.The 1-1/4" thick fender spacers can be used with a 6-3/8" wide custom front fender. The 1.0" thick fender spacers canbe used with a 6" wide custom front fender. The 0.8125" thick fender spacers can be used with a 5-1/2" wide customfront fender.
$110.95 $93.03

ACCUTRONIX FENDER SPACERS CHROME 41MMX0.8125, #TFS41-EMF812C

These FLH billet fender spacers are designed to work with Arlen Ness "Hot Legs" billet lower legs, AmericanSuspension " Bagger Legs" billet lower legs, or stock Harley Davidson 41MM FLH & FLT lower legs, not FX or XL legs.The 1-1/4" thick fender spacers can be used with a 6-3/8" wide custom front fender. The 1.0" thick fender spacers canbe used with a 6" wide custom front fender. The 0.8125" thick fender spacers can be used with a 5-1/2" wide customfront fender.
$110.95 $93.28

ACCUTRONIX FENDER SPACERS CHROME 41MMX1, #TFS41-EMF100C

These FLH billet fender spacers are designed to work with Arlen Ness "Hot Legs" billet lower legs, AmericanSuspension " Bagger Legs" billet lower legs, or stock Harley Davidson 41MM FLH & FLT lower legs, not FX or XL legs.The 1-1/4" thick fender spacers can be used with a 6-3/8" wide custom front fender. The 1.0" thick fender spacers canbe used with a 6" wide custom front fender. The 0.8125" thick fender spacers can be used with a 5-1/2" wide customfront fender.
$110.95 $93.28

ACCUTRONIX FENDER SPACERS CHROME 41MMX1.25, #TFS41-EMF125C

These FLH billet fender spacers are designed to work with Arlen Ness "Hot Legs" billet lower legs, AmericanSuspension " Bagger Legs" billet lower legs, or stock Harley Davidson 41MM FLH & FLT lower legs, not FX or XL legs.The 1-1/4" thick fender spacers can be used with a 6-3/8" wide custom front fender. The 1.0" thick fender spacers canbe used with a 6" wide custom front fender. The 0.8125" thick fender spacers can be used with a 5-1/2" wide customfront fender.
$110.95 $93.03

ACCUTRONIX SMOOTH FENDER SPACERS BLACK 41MM (FOR 5.5 FENDERS), #TFS41-SF125B

FLH fender spacers fit H-D FLH & FLT 41mm fork legs. The bolt spacing is 3.0" on these spacers& they are radiused to clear the fork leg. These fender spacers are machined from 6061 T-6 Billet Aluminum andbrilliantly Black Anodized or Chrome Plated.NOTE: For use with a 5-1/2" wide custom fender on OEM FLH or FLT 41mm fork legs.
$79.95 $68.87